Mahadev Enterprise

• Flanged: The "F" in LMF indicates a flanged design, which allows for mounting to a flat surface. 
• Round Flange: The flange is circular, providing a mounting surface. 
• Sealed (UU): The double "UU" indicates that the bearing is sealed on both ends to prevent dust and debris from entering. 
• 16mm Bore: This refers to the diameter of the shaft the bearing can accommodate. 
• 28mm Outer Diameter: This is the diameter of the bearing's outer cylinder. 
• 37mm Length: This is the overall length of the bearing. 

High Precision and Rigidity MAXIMA linear motion bearings are produced from a solid steel outer cylinder. Also the linear motion bearing incorporates an industrial strength resin retainer 

Ease of Assembly The standard type of MAXIMA linear motion bearing can be loaded from any direction.

Ease of Replacement MAXIMA Linear Motion bearing of each type are completely interchangeable with other brands because of their standardised dimensions and strict precision control. Replacement because of wear or damage is therefore easy and accurate

Maxima Linear Bearing LMF 30UU has inner diameter of 30 mm. It is suitable for Shaft Dia 30 mm. Maxima Linear Bearings are of High Accuracy. For optimum performance use LMF 30 UU with Maxima Hardened and Ground Shaft MCS 30 

Features :

High Precision and Rigidity MAXIMA linear motion bearings are produced from a solid steel outer cylinder. Also the linear motion bearing incorporates an industrial strength resin retainer 

Ease of Assembly The standard type of MAXIMA linear motion bearing can be loaded from any direction.

Ease of Replacement MAXIMA Linear Motion bearing of each type are completely interchangeable with other brands because of their standardised dimensions and strict precision control. Replacement because of wear or damage is therefore easy and accurate.

• ME 25 UU: This part number indicates a standard linear ball bearing with a 25mm bore (the diameter of the shaft it fits), a 40mm outer diameter, and a length of 58mm. 
• Linear Ball Bearing: This type of bearing uses recirculating ball bearings within a housing to provide smooth and precise linear motion. 
• UU: This suffix indicates that the bearing has seals on both ends to protect it from contaminants. 
• Dimensions: The LME 25 UU has a 25mm bore, a 40mm outer diameter, and a length of 58mm. 
• Dynamic Load: The dynamic load rating is 0.98 kN (kilonewtons). 
• Static Load: The static load rating is 1.57 kN. 

• LMEF: Indicates the series, which is a flange type linear bearing. 
• 30: Refers to the 30mm inner diameter of the bearing, which matches the shaft diameter it is designed to work with. 
• LUU: Specifies the type of seals (lip seals on both sides) and the long length of the bearing. 
• Flange: The flange allows for easy mounting and secure attachment to a surface.