Bearings For Machines

Product Details:

The SPACEA Series of bearings for clean-room applications aim for zero emissions. By taking advantage of proprietary technologies, applications for which the SPACEA Series of bearings can be used has been expanded to include high-temperature operating conditions in normal atmosphere and vacuum environments.

Product Details:

NTN housing units are available in many different designs as plummer block, flanged and take-up housing units. The ready-to-fit units comprise NTN cast iron or INA sheet steel housings in which the,NTN radial insert ball bearings are integrated. In order to ensure correct function and operational reliability in all operating conditions, the bearing and housing are matched to each other.

Due to the spherical outside surface of the bearing outer ring and the spherical housing bore, NTN housing units can compensate for static angular misalignment of the shaft; see Compensation of misalignments.

The units are used predominantly as locating bearings, but can also be used as non-locating bearings under low loads and speeds.

The housings are screw mounted on the adjacent construction. Less demanding tolerances are sufficient for the screw mounting surfaces.

Additional Information:

• Delivery Time: 1-2 DAYS
• Packaging Details: NTN BOXING

Product Details:

This rolling bearing, which is packed with fluorine grease for high-temperature operating conditions and uses MoS2 solid lubricant, can be used in high-temperature environments up to 400 °C.

Product Details:

High corrosion-resistant bearings are applicable in corrosive environments such as water, weak acid and alkali, and strong acid and reactive gas. High corrosion-resistant bearings include stainless steel bearings, Molded-Oil bearings, and corrosion-resistant coated bearings (Nickel coating) for water environments; ceramic bearings and ESA bearings for weak acid and alkali environments; and ceramic bearings and the Aqua-Bearing for strong acid and reactive gas environments.

Product Details:

Bearings for non-magnetic requirement are classified into non-magnetic (relative permeability 1.01 or less) bearings and completely non-magnetic (relative permeability 1.001 or less) bearings. Both bearings are harder and more resistant to corrosion than conventional stainless steel or beryllium-copper alloys.