Pillow Block Bearing
We are a leading Manufacturer of uct bearing ntn manufacture, pillow block bearing, skf pillow block uct 207, skf pillow block ucp 209-28, skf pillow block bearing ucf 205 and skf pillow block ucp 212 from Bhayander West, India.
UCT Bearing NTN Manufacture
Request Callback
₹ 300 / Piece Get Latest Price
Product Brochure
| Brand | NTN |
| Bearing Number | UCT 210,UCT 211,UCT 213,UCT 214,UCT 215 ETC |
| Cage Type | Steel |
| Bearing type | Plain Bearing |
| Usage/Application | INDUSTRIES |
| Material | IRON |
Minimum order quantity: 1 Piece
NTN housing units are available in many different designs as plummer block, flanged and take-up housing units. The ready-to-fit units comprise NTN cast iron or INA sheet steel housings in which the,NTN radial insert ball bearings are integrated. In order to ensure correct function and operational reliability in all operating conditions, the bearing and housing are matched to each other.
Due to the spherical outside surface of the bearing outer ring and the spherical housing bore, NTN housing units can compensate for static angular misalignment of the shaft; see Compensation of misalignments.
The units are used predominantly as locating bearings, but can also be used as non-locating bearings under low loads and speeds.
The housings are screw mounted on the adjacent construction. Less demanding tolerances are sufficient for the screw mounting surfaces.
Pillow Block Bearing
Request Callback
₹ 120 / Piece Get Latest Price
Product Brochure
| Material | Stainless Steel |
| Product Brand | NTN |
| Packaging Type | Box |
| Shape | Round |
plummer block housings are prim- arily intended for self-aligning ball bear- ings, spherical roller bearings and CARB bearings. The housings are designed on a “building block” principle. This enables a more generous choice of bearing, shaft mounting, seals and type of lubrication.
SKF PILLOW BLOCK UCT 207
Request Callback
₹ 400 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Bearing Number | UCT 207 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing variation | Split housing |
| Housing Material | Cast Iron |
| Shaft Diameter | 35 MM |
| Shaft Height | 37 MM |
Minimum order quantity: 1 Piece
Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. Designed for an alternating rotation Quick and easy to mount onto the shaft Accommodate static initial misalignment Long service life Reduced noise and vibration levels
SKF PILLOW BLOCK UCP 209-28
Request Callback
₹ 550 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 209-28 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 44.45 mm |
| Shaft Height | 54 mm |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK BEARING UCF 205
Request Callback
₹ 275 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 205 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 25MM |
| Shaft Height | 35.6MM |
| Mounting Bolt Size | 10MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCP 212
Request Callback
₹ 390 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 212 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 60MM |
| Shaft Height | 62MM |
| Mounting Bolt Size | 16MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCT 216
Request Callback
₹ 590 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Bearing Number | UCT 216 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 80 MM |
| Shaft Height | 70 MM |
Minimum order quantity: 1 Piece
Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. Designed for an alternating rotation Quick and easy to mount onto the shaft Accommodate static initial misalignment Long service life Reduced noise and vibration levels
SKF PILLOW BLOCK UCP 215
Request Callback
₹ 500 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 215 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 75MM |
| Shaft Height | 73MM |
| Mounting Bolt Size | 20MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 213
Request Callback
₹ 425 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 213 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 65MM |
| Shaft Height | 72MM |
| Mounting Bolt Size | 20MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCF 206
Request Callback
₹ 290 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 206 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 30MM |
| Shaft Height | 40.1M |
| Mounting Bolt Size | 10MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCP 211-32
Request Callback
₹ 500 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 211-32 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 50.8 mm |
| Shaft Height | 63.5 mm |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 204
Request Callback
₹ 150 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Bearing Number | UCP 204 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 20MM |
| Shaft Height | 33.3M |
| Lubrication | Manual Lubrication |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 205-14
Request Callback
₹ 350 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 205-14 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing variation | Split housing |
| Housing Material | Cast Iron |
| Shaft Diameter | 22.225 mm |
| Shaft Height | 36.5 mm |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 216
Request Callback
₹ 525 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 216 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 80MM |
| Shaft Height | 78MM |
| Mounting Bolt Size | 20MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 211
Request Callback
₹ 350 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 211 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 55MM |
| Shaft Height | 59MM |
| Mounting Bolt Size | 16MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 208-24
Request Callback
₹ 400 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 208-24 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 38.1 mm |
| Shaft Height | 49.2 mm |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 207-22
Request Callback
₹ 430 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 207-22 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 1.375 in |
| Shaft Height | 1.874 in |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 206-19
Request Callback
₹ 400 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 206-19 |
| Housing type | Pillow block unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 1.187 in |
| Shaft Height | 1.689 in |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCF 209
Request Callback
₹ 425 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 209 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 45MM |
| Shaft Height | 52.2MM |
| Mounting Bolt Size | 14MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCP 210
Request Callback
₹ 345 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 210 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 50MM |
| Shaft Height | 56MM |
| Mounting Bolt Size | 16MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCT 215
Request Callback
₹ 570 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Bearing Number | UCT 215 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 75 MM |
| Shaft Height | 70 MM |
Minimum order quantity: 1 Piece
Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. Designed for an alternating rotation Quick and easy to mount onto the shaft Accommodate static initial misalignment Long service life Reduced noise and vibration levels
SKF PILLOW BLOCK UCT 214
Request Callback
₹ 580 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Bearing Number | UCT 214 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 70MM |
| Shaft Height | 70MM |
Minimum order quantity: 1 Piece
Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. Designed for an alternating rotation Quick and easy to mount onto the shaft Accommodate static initial misalignment Long service life Reduced noise and vibration levels
SKF PILLOW BLOCK UCP 209
Request Callback
₹ 310 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 209 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 45MM |
| Shaft Height | 51MM |
| Mounting Bolt Size | 14MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCP 206
Request Callback
₹ 275 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCP 206 |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 30MM |
| Shaft Height | 42.9MM |
| Mounting Bolt Size | 14MM |
Minimum order quantity: 1 Piece
Pillow block ball bearing unit with extended inner ring and set screw locking, cast iron, Japanese standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is strong and stiff, and is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount. Strong Designed for a constant and alternating rotation Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Cost-effective
SKF PILLOW BLOCK UCT 205
Request Callback
₹ 300 / Piece Get Latest Price
Product Brochure
| Material | Cast Iron |
| Product Brand | SKF |
| Housing type | Pillow block unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Shaft Diameter | 25MM |
| Shaft Height | 32MM |
Minimum order quantity: 1 Piece
Take-up cast iron unit with insert ball bearing, set screw locking and extended inner ring, JIS Take-up ball bearing units, consisting of an insert bearing based on a sealed deep groove ball bearing mounted in a grey cast iron housing. Typically mounted in take-up frames, the unit has an inner ring extended on both sides and is locked by tightening two set screws on the inner ring, which makes it easy to mount. Units with designation suffix /H feature a 120° angle of separation between the set screws that contributes to a higher stability and a better load balance. Designed for an alternating rotation Quick and easy to mount onto the shaft Accommodate static initial misalignment Long service life Reduced noise and vibration levels
SKF PILLOW BLOCK UCF 211
Request Callback
₹ 455 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 211 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 55MM |
| Shaft Height | 58.4MM |
| Mounting Bolt Size | 16MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 204-12
Request Callback
₹ 250 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 204-12 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 19.05 mm |
| Shaft Height | 25.5 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 205-14
Request Callback
₹ 300 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 205-14 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing variation | Split housing |
| Housing Material | Cast Iron |
| Shaft Diameter | 0.875 in |
| Shaft Height | 1.063 in |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 215
Request Callback
₹ 530 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 215 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 75MM |
| Shaft Height | 78.3MM |
| Mounting Bolt Size | 16MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 218
Request Callback
₹ 150 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 218 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 90MM |
| Shaft Height | 96MM |
| Mounting Bolt Size | 20MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 216
Request Callback
₹ 550 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 216 |
| Housing type | Square Flange unit |
| Bearing type | Ball Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 80MM |
| Shaft Height | 83.3MM |
| Mounting Bolt Size | 20MM |
Minimum order quantity: 1 Piece
Square flanged ball bearing unit with set screw locking, cast iron housing, JIS These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 206-18
Request Callback
₹ 520 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 206-18 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 1.125 in |
| Shaft Height | 1.181 in |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 206-19
Request Callback
₹ 560 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 206-19 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 30.162 mm |
| Shaft Height | 30 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 207-20
Request Callback
₹ 590 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 207-20 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 31.75 mm |
| Shaft Height | 32 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 207-23
Request Callback
₹ 600 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 207-23 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 1.437 in |
| Shaft Height | 1.26 in |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 207-22
Request Callback
₹ 600 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 207-22 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 34.925 mm |
| Shaft Height | 32 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 212-36
Request Callback
₹ 250 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 212-36 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 57.15 mm |
| Shaft Height | 47.5 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 209-28
Request Callback
₹ 290 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 209-28 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 1.75 in |
| Shaft Height | 1.496 in |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 208-24
Request Callback
₹ 220 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 208-24 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 38.1 mm |
| Shaft Height | 35.5 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
SKF PILLOW BLOCK UCF 213-40
Request Callback
₹ 290 / Piece Get Latest Price
Product Brochure
| Material | Bearing Steel |
| Product Brand | SKF |
| Bearing Number | UCF 213-40 |
| Housing type | Square Flange unit |
| Bearing type | Cylindrical Roller Bearing |
| Locking type | Set Screw |
| Housing Material | Cast Iron |
| Housing variation | Split housing |
| Shaft Diameter | 63.5 mm |
| Shaft Height | 50 mm |
Minimum order quantity: 1 Piece
These square flanged ball bearing units are compliant with Japanese Industrial Standards (JIS). They consist of an insert bearing, with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement. Resist high levels of contamination Designed for high temperatures and speeds Accommodate relatively heavy loads Cost-effective
X
Product Videos
Ceramic Bearing
Get QuoteContact Us
Dilip Gandhi (Owner)
Mahadev Enterprise
1005, Janki Heritage, 150 Feet Road, Opp Maxus Mall, Near Kotak Mahindra Bank, Mira Bhayandar
Bhayander West - 401101, Thane, Maharashtra, India
Send Email