Mahadev Enterprise

Bore Size	10 mm
Material	Stainless Steel
Brand	SKF
Type of Bearing	KF Angular Contact Ball Bearings
Surface Finishing	plane

Minimum order quantity: 1 Piece

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis These bearings have very thin rings and a constant cross-sectional height within a particular series, irrespective of the bearing size. They are characterized by a low weight and high stiffness. SKF fixed section bearings have inch sizes and are available open or sealed in up to eight different cross-sectional heights.

 7200 BEP - 7201 BEP - 7203 BECBM
7209 BECBM
I7214 BEP7222 BEP

Bearing Type	Angular Contact Bearings
Number Of Rows	Double Row
Bearing Number	3209 A-2RS1TN9/MT33
Type of Bearing	DOUBLE ROW ANGULAR CONTACT BEARING
Outer Diameter	85 MM
Lubrication	GREASE

Minimum order quantity: 1 Piece

Double row angular contact ball bearing with seals or shields Double row angular contact ball bearings, with seals or shields, correspond to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. Depending on the sealing execution, they can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions. • High-speed capability • Accommodate relatively high radial loads, high axial loads in both directions and tilting moments • Suitable where a stiff bearing arrangement is required • Require less axial space than equivalent pair of single row angular contact ball bearings • Integral sealing prolongs bearing service life

Shape	Round
Surface Finishing	Polished
Outer Diameter	140 mm
Bore Size	65 mm
Material	Steel
Application	Machinery

We are highly acknowledged organization matching engaged in presenting remarkable range of Angular Contact Ball Bearing.

Features:

• Maintenance free
• Light weight
• Top quality

Bearing Type	Angular Contact Bearings
Number Of Rows	Single Row
Bearing Number	7026 ACD HCP4
Type of Bearing	ANGULAR CONTACT BEARING
Outer Diameter	200 MM
Lubrication	NONE

Minimum order quantity: 1 Piece

Super-precision, high-capacity, single row angular contact ball bearing Super-precision, high-capacity, single row angular contact ball bearing These super-precision, high-capacity, single row angular contact ball bearings, with 25° contact angle, accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They are designed to accommodate heavy loads at relatively high speeds under low to moderate operating temperatures. • Very high running accuracy • Very high load carrying capacity • Relatively high speed and stiffness

Material	Stainless Steel
Usage/Application	Industrial
Brand	SKF
Type of Bearing	Double Direction Angular Contact Thrust Bearing
Bearing Number	BTW80CTN9/SP
Surface Finishing	Polished

Minimum order quantity: 1 Piece

This BTW80CTN9/SP bearing is a double direction angular contact thrust ball bearing with a 60° contact angle and two glass fibre reinforced PA66 cages. The bearing's dimensions are 80x125x54.

Material	Stainless Steel
Bearing Type	Angular Contact Bearings
Number Of Rows	Double Row
Bearing Number	3322
Type of Bearing	3322 A Double row angular contact ball bearing
Outer Diameter	240 mm

Minimum order quantity: 1 Piece

Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.

• High-speed capability
• Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
• Suitable where a stiff bearing arrangement is required
• Require less axial space than equivalent pair of single row angular contact ball bearings

Material	Stainless Steel
Bearing Type	Angular Contact Bearings
Number Of Rows	Double Row
Bearing Number	3322 M
Outer Diameter	240MM
Thickness	91.2MM

Minimum order quantity: 1 Piece

Double row angular contact ball bearingDouble row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.

• High-speed capability
• Accommodate relatively high radial loads, high axial loads in both directions and tilting moments
• Suitable where a stiff bearing arrangement is required
• Require less axial space than equivalent pair of single row angular contact ball bearings

Outer Diameter	more than 100 mm
Material	Stainless Steel
Type of Bearing	ANGULAR CONTACT BEARING
Type	SINGLE ROW ANGULAR CONTACT BALL BEARING
Bearing Number	7219 BECBM
Outside Diameter	170 mm

Minimum order quantity: 1 Piece

Single row angular contact ball bearing These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction. • High-speed capability • Accommodate relatively high radial loads and large unilateral axial loads

Material	Stainless Steel
Bearing Type	Angular Contact Bearings
Bearing Number	7303 BEP
Type of Bearing	Single row angular contact ball bearing
Outer Diameter	47 MM
Lubrication	NONE

Minimum order quantity: 1 Piece

Single row angular contact ball bearing These single row angular contact ball bearings can accommodate radial and axial loads acting simultaneously, where the axial load acts in one direction only. They can operate at high speeds and, depending on the variant, even very high speeds. They are more suitable than deep groove ball bearings for supporting large axial forces acting in one direction. • High-speed capability • Accommodate relatively high radial loads and large unilateral axial loads

Bearing Type	Angular Contact Bearings
Number Of Rows	Double Row
Bearing Number	234434-M-SP
Type of Bearing	AXIAL ANGULAR CONTACT BALL BEARING
Outer Diameter	260 MM
Thickness	108 MM

Minimum order quantity: 1 Piece

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings, and consist of two single row angular contact thrust ball bearings arranged back-to-back. The large number of balls enables these bearings to accommodate high axial loads in both directions and provides a high degree of system rigidity. • Accommodate high axial loads in both directions • Offer maximum load carrying capacity and maximum system rigidity • Available for shaft diameters from 35 to 200 mm • Available with either steel or ceramic balls • Separable

Bearing Type	Thrust Bearings
Number Of Rows	Double Row
Bearing Number	BTW 170 CM/SP
Outer Diameter	260 MM
Thickness	108 MM
Ball Bearing Type	DOUBLE DIRECTION ANGULAR CONTACT THRUST BALL BEARING

Minimum order quantity: 1 Piece

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended for mounting in combination with cylindrical roller bearings, and consist of two single row angular contact thrust ball bearings arranged back-to-back. The large number of balls enables these bearings to accommodate high axial loads in both directions and provides a high degree of system rigidity. • Accommodate high axial loads in both directions • Offer maximum load carrying capacity and maximum system rigidity • Available for shaft diameters from 35 to 200 mm • Available with either steel or ceramic balls • Separable

Bore Size	200 mm
Product Brand	RHP
Material	Bearing Steel
Bearing Type	Angular Contact Ball Bearing
Bearing Number	7904CTRDULP3
Number Of Rows	Single Row

Minimum order quantity: 1 Piece

RHP Bearings have a long heritage, which is respected throughout the world. RHP Super Precision Bearing (Ransom, Hoffman and Pollard) was formed in 1969 as a result of the amalgamation of three of the UK's leading bearing manufacturers. RHP Bearings has gone onto field of various bearing types in a multitude of applications. NSK a major world force in rolling bearing technology is an organization committed to global localization. Recognizing the synergy with RHP since 1990, NSK joined force to create NSK-RHP which is strongly identified as a core brand by customers throughout the world.

Currently NSK-RHP has three specialties:

• RHP Inch series bearing
• RHP Bearing units incorporated into different housings
• RHP Super Precision Bearings for Machine Tool Application

In the field of modern machine tool building, instrument making and other engineering activities, ever increasing demands are placed on bearing performances in the terms of higher rotational accuracies and speeds. These demands are reliably met with RHP Super Precision Bearings, which demonstrates the following distinct features:

Features:

• Extreme accuracy
• High rotational speed
• Minimum friction and heat generation
• Controlled rigidity

NSK-RHP Super Precision Bearings:

NSK-RHP manufacturers three basic types of Super Precision Bearings:

• Single row angular contact ball bearings
• Ball screw support bearings
• Single row radial ball bearings
• Angular contact ball bearings

This is the most adaptable and important bearing within the NSK-RHP range for use in machine tool spindles. The many combinations of contact angle and preload allow precise bearing selection to cope with most arduous of requirements, be they speed or capacity. The range has preferred contact angles 15 degrees and 25 degrees and laminated phenolic resin cages. Bearings can be supplied singly, in paired units or multiple sets.

The NSK-RHP Excel range has been introduced in response to industries need for higher speeds and has a larger number of balls. They also offer higher stiffness. They are dimensionally interchangeable with bearings with normal ball diameter. The NSK-RHP Ultra range is designed for particularly high speed application.

The NSK-RHP Excel, Ultra and normal ranges can be supplied with silicon nitride (ceramic) balls. These offer higher speeds and lower operation temperatures, as well as enhanced stiffness.

Ball Screw Support Bearings:

• NSK-RHP has available a comprehensive range of ball screw support bearings, cartridge and pillow block
• Units Ball Screw support bearings with their high rigidity, low torque, simple mounting and elimination
• Of the need for preload adjustment provide ideal support solution
• RHP ball screw support bearings are

Designated BSB have 60 degrees contact angle and are manufactured to P3 tolerances. The balls are separated by one piece, glass fiber reinforced nylon molded cage.

Usage/Application	INDUSTRIES & MACHINE
Brand	NSK
Structure	Angular Contact
Shape	Round
Outside Diameter	35 mm
Material	Stainless Steel

Minimum order quantity: 1 Piece

NSK offers a wide lineup of precision angular contact ball bearings where customers to choose the optimum specification of bearing according to the needs of their application. NSK precision angular contact ball bearings provide the perfect solution for applications requiring high runout accuracy of rotating machine parts, such as the machine tool main spindles, or the application of faster rotating speeds.

Features:

• This lineup of bearing includes a basic series that meets ISO standards, and a specified series targeting machine tools.
• A series of sealed angular contact ball bearings with prepacked grease is available.
• The Robust series of high performance bearings include, a wide lineup of bearings, ranging from highly rigid types to ultrahigh-speed types.

Bore Size	8 mm
Material	Stainless Steel
Bearing Type	Angular Contact Bearings
Application	Machinery,Motor
Finish	Polished

Minimum order quantity: 1 Piece

The design of SKF double row angular contact ball bearings corresponds to two single row angular contact ball bearings arranged back-to-back.

Bearing Features:

Less axial space: Can be used for applications where two single row angular contact ball bearings arranged back-to-back take up too much axial space.

Accommodates radial as well as axial loads in either direction

Accommodates tilting moments

Stiff bearing arrangement