Mahadev Enterprise

Minimum order quantity: 1 Piece

NTN housing units are available in many different designs as plummer block, flanged and take-up housing units. The ready-to-fit units comprise NTN cast iron or INA sheet steel housings in which the,NTN radial insert ball bearings are integrated. In order to ensure correct function and operational reliability in all operating conditions, the bearing and housing are matched to each other.

Due to the spherical outside surface of the bearing outer ring and the spherical housing bore, NTN housing units can compensate for static angular misalignment of the shaft; see Compensation of misalignments.

The units are used predominantly as locating bearings, but can also be used as non-locating bearings under low loads and speeds.

The housings are screw mounted on the adjacent construction. Less demanding tolerances are sufficient for the screw mounting surfaces.

plummer block housings are prim- arily intended for self-aligning ball bear- ings, spherical roller bearings and CARB bearings. The housings are designed on a “building block” principle. This enables a more generous choice of bearing, shaft mounting, seals and type of lubrication.

Minimum order quantity: 1 Piece

Oval flange ball bearing unit with extended inner ring and set screw locking, cast iron housing, JISThese oval flanged ball bearing units are compliant with JIS standards. They consist of an insert bearing. with an extended inner ring and set screw locking, and are suitable for applications where the direction of rotation is constant or alternating. The bearing is mounted in a cast iron housing, which can be bolted to a machine wall or frame. Ball bearing units can accommodate moderate initial misalignment, but normally do not permit axial displacement.

• Resist high levels of contamination
• Designed for high temperatures and speeds
• Accommodate relatively heavy loads
• Cost-effective

Minimum order quantity: 1 Piece

The UCP pillow block consists of a bearing insert with a spherical outer diameter in a 2 bolt cast iron housing. The bearing is usually fixed to the shaft by means of two set screws in the extended portion of the inner ring.

1. The UCF Bearing we offer to our clients is mainly designed to provide load support to the rotating shaft axis. UCF Bearing is widely appreciated for durability and long serviceability. These UCF Bearings are available at industry leading prices.